How to print a poster: the designer’s guide

01. CMYK or RGB?


> Work in CMYK rather than RGB

If you’re producing your own poster designs with the intention of taking these to a print shop then make sure you’re working in a CMYK colour space rather than RGB. In Photoshop you can easily switch to this mode via the Image>mode>CMYK color menu command to give you a more accurate representation of how your colours will print.

02. Converting to CMYK

If you’ve been working in RGB and have converted your work to CMYK just before you send the file to the printer you’ll notice that the greens and blues in your image become lifeless and dull.

You can use Photoshop’s Gamut warning tool (View>Gamut warning from the file menu) to highlight the colours which will have trouble converting from RGB to CMYK.

The RGB colour space has a greater array of colours than CMYK.  If you imagine that all the computer specific colours you pick in Photoshop for your poster then have to printed with a selection of real world inks. If these can’t print some of these colours they become “out of gamut” of what is possible with ink.

03. Set the right resolution

Print files are BIG. One of the most common delays in a printing job is caused by work being sent back by the printer because the resolution was too low. Files destined for print should be set to 300dpi. DPI stands for Dots Per Inch. Simply put the more dots to make up the image the higher the resolution. More printed dots in an inch means higher quality reproduction.

When resolutions are too low the end result can be a blurred and pixelated poster. In Photoshop you can set the dots per inch on creating a new document File>new and entering 300 in the Resolution box.

> Set the correct DPI and your poster won’t look too blurry

04. Set the right size

Popular print sizes are A2 (594mm x 420mm), A3 (420mm x 297mm) and A4 (297mm x 210mm). Paper choice and weight can be discussed with your printer but 170gsm Silk or Gloss Art FSC or 150gsm are good choices. GSM stands for grams per square meter and determines how heavy the paper stock is.

05. How to supply your files

Supply your print files in the PDF format (print resolution at 300dpi) or tiffs with no compression at the same dpi. You can send jpegs if they’re high res enough and if you just want to print a poster of your pet pooch from your smart phone you can do this as well by sending a jpeg but be warned bit around the edges of the photo will be cut off and the colour will shift.

> Supply your files as PDFs or tiffs with no compression.

06. What is litho printing?

A wide variety of mass produced print item (books, posters, newspapers etc.) are produced using litho printing. Put simply a litho print involves the printer making a set of “plates” which are used to press the image to the paper.

Creating these plates is at a cost and doesn’t offer the immediacy of digital printing. The initial outlay can be expensive but if you’re doing a large print run and want to output up to A1 it’s the process which offers a higher quality print and finish than digital printing.

07. Digital vs litho printing

You have two choices for printing: digital or Litho. (Well, okay you have three: you can always print at home. But chances are you don’t have a printer big enough for A3 printing.)

The choice between digital and Litho printing will mostly be dependent on the money you have for the print job and how soon you need it doing. Digital printing with inkjet or laser printers is the cheaper and quicker of the two and good smaller print runs. If budget is an issue and you’re not being too exacting over the quality as well as not printing above A3 go with digital printing.

08. Choose the right printer

Different printers have different levels of expertise, so it’s worth doing your homework and getting personal recommendations. Also make sure you tailor the printer to the job at hand.

In the UK, for example, Metro Print is well known for high quality wand specialist work as well as being one of the few places around to use laser light source printers and genuine black and white photographic prints. For high quality crystal clear prints on heavy stock quality Kodak paper these are the people to visit.

However, you might just want to print lots of stuff digitally without a special finish or on the highest grade paper. So don’t write off high street printers such as Prontaprint and Snappy Snaps. There’s a reason they’re all over the high street. They offer a decent affordable service and will print you photo posters direct from a memory stick mobile phone, Instagram or Facebook and can help you enhance your work with a range of photo art effects.

> Do your homework and ask around to find the best printer for your needs.

09. The importance of spellcheck

Luke Woodhouse advises that you, “spellcheck, spellcheck, spellcheck. Then get your mum to spell check it and anyone else who will read it for you. There’s nothing more soul destroying than a typo and they’re easy to miss if you’re too close to your masterpiece.

> Got words on your poster? Then double and treble check them, advises Luke Woodhouse.

10. What is ‘bleed’?

‘Bleed’ is simply a little bit (usually 3 or 5mm) around the edge of your poster design which (depending on how the printer cuts the paper down) may or may not be shown in the finished result. It’s essentially your room for error and ensures there isn’t a random white line on the edges of your poster.

Programs such as InDesign and QuarkXPress make it easy and will show guides, so you can see where the bleed starts and finishes. Always ask the printer you’re using (or check your own printer settings) to determine how much bleed is to be given.

11. What is ‘trim’?

The trim is the edge of the final printed output. To prevent text and logos being chopped off the final output they should be placed with some breathing space around them and no closer to the Trim Edge than 1/8in.

12. Use vectors

Designer Franz Jeitz advises: “When it comes to printing, especially large format printing, vectors are you friend. Try to design as much as possible in a vector based program such as Adobe Illustrator. Not only will it reduce your file size, but it will ensure that you get the crispest print result.

> Franz Jeitz, who designed this poster for SXSW, advises you make vectors your friend,

13. Check your fonts

Always run a pre-print check. In InDesign this is known as a “Pre-flight” This will bring up any issues such as RGB files being used or fonts used which aren’t embedded. InDesign can package up all your print files and links (File> package) into one folder which will spare you any missing font nightmares.

14. Get your blacks right

Ben Powell suggests: “When printing posters using black, there are so many different types of black you can use (RGB, Photoshop, neutral rich, registration, flat, designer, etc.)

“My tip would be to avoid using RGB black as this is primarily used for the web/digitally and will look washed out and grey in print. Which black you should use will depend entirely on your printing process and what paper stock you’re using, especially if you’re printing solid blacks.

“When I designed a recent infographic piece, I spent days printing various different blacks on different stocks of paper to get the most accurate black whilst making sure the colours didn’t bleed into each other, a really lengthy but worthwhile process! Always leave plenty of time to test your blacks; it can completely ruin a fantastic poster design if you don’t.”

> Ben Powell advises you avoid RGB black as it will look grey and washed out in print.


Thanks to CreativeBloq.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s